Patina 1 2

1. Patina 12 Foodserviceace
2. Platina 125

Traditional Rainbow and Torch Patinas are very interesting finishes. Depending on the application method and the metal used, many different finishes can be created using these patinas. Traditional Rainbow and Torch Patinas are available in 8oz., 32oz., 1gal., and 5gal. sizes. Spray tops are included with 8oz. and 32oz. bottles. One gallon of Traditional Rainbow or Torch Patina generally covers 200 sq. ft.

Join us at Patina 250 in downtown Buffalo. Now serving delicious breakfast, lunch, brunch & dinner entrees, plus a full bar for drinks. Chatham Patina 1/2 Lite 1-Panel Painted White Right-Hand Inswing Steel Prehung Front Door: 36 in. Architectural 1/2 Lite 1-Panel Painted White Steel Prehung Front Door: 36 in. Lanza Patina 3/4 Lite 1-Panel Painted White Right-Hand Inswing Steel Prehung Front Door: Price $ 547 00 $.

For best results, apply Rainbow Patina to a shiny and clean metal surface. This patina does not work with the Metal Coatings.

Patina 12 Foodserviceace

Rainbow Patina on Brass:
Clean metal with Metal Cleaner (do not sandblast).
Apply two coats of Rainbow Patina to hot metal (200-220°F).
Additional coats will bring more silver colors.
Wash while hot for brightest colors.
When dry, protect the finish with 2 coats of Clear Guard.

Rainbow Patina on Copper:
Clean metal with Metal Cleaner (do not sandblast).
Apply 1-2 coats of Rainbow Patina to hot metal (200-220°F).
Do not wash.
When dry, protect the finish with 2 coats of Clear Guard.
The color will continue to develop for 1-2 days.

Platina 125

Rainbow Patina on Cold Rolled Steel:
Clean metal with Metal Cleaner (do not sandblast).
Apply Rainbow Patina to hot metal (200-220°F).
Wash while hot.
When dry, protect the finish with 2 coats of Clear Guard.

Rainbow Patina on Stainless Steel:
Clean metal with Metal Cleaner (do not sandblast).
Apply many coats of Rainbow Patina to hot metal (200-220°F).
Wash while hot.
When dry, protect the finish with 2 coats of Clear Guard.

On iron and steel, Torch Patina is designed to be used over a base of Copper Plate Patina to create the torch effect. The uniformity and colors of the patina are determined by the application techniques. Without the Copper Plate Patina base, Torch Patina will turn steel a mixture of black, grey, and rust.

On Bronze, Brass, and Copper, Torch Patina is designed to be applied directly to clean metal.

Please see the Technical Data Sheet for current instructions and safety information.